Professor Kathy Lu's Group Publications
Updated July 2023
Patents:
Publications:
Books:
Patents:
- K. Lu, M. K. Mahapatra, “Barium Oxide, Calcium Oxide, Magnesia, and Alkali Oxide Free Glass,” US8,541,327, September 2013.
- K. Lu, F. Shen, Tri-Layer CO(3)O(4)-SDC Protective Coating for Solid Oxide Fuel Cell Interconnects, U.S. Patent Application No: 62/318,369, April 2016.
Publications:
Books:
- K. Lu, Nanoparticulate Materials-Synthesis, Characterization, and Processing, John Wiley & Sons, Inc., Hoboken, New Jersey, ISBN: 978-1-1182-9142-9, 464 pages, October 2012.
- K. Lu, Materials in Energy Conversion, Harvesting, and Storage, John Wiley & Sons, Inc., Hoboken, New Jersey, ISBN: 978-1-118-88910-7, 448 pages, September 2014.
Books Edited:
Book Chapters:
1. K. Lu, K. Ning, “Nanoscale Sintering,” Metal Oxide Nanoparticles: Formation, Functional Properties and Interfaces, Metal Oxide Nanoparticles: Formation, Functional Properties and Interfaces, First Edition. Edited by Oliver Diwald and Thomas Berger. © 2021 John Wiley & Sons Ltd.
2. K. Lu, W. Li, and B. Chen, “Sintering of Porous Materials,” Sintering: Mechanisms of Convention Nanodensification and Field Assisted Processes, Editors: Ricardo H. R. Castro, Klaus van Benthem, Springer, Engineering Materials 35, 2013, Volume 35, 115-136, DOI: 10.1007/978-3-642-31009-6_6.
3. K. Lu, “Shaping of 3D Nanoceramics and Their Composites,” Handbook of Nanoceramics and Their Based Devices, American Scientific Publishers, Edited by T.Y. Tseng and H. S. Nalwa, vol. 2, p 151-177, ISBN:1-58883-116-7, Stevenson Ranch, CA, 2009.
4. K. Lu and X. Zhu, “Liquid Nanoparticles: Synthesis and Characterization,” Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publishers, Stevenson Ranch, CA, 2010. Editor: H. S. Nalwa, ISBN: 1-58883-146-7, Volume 15, 537-574, 2010.
Journal papers:
Technical papers:
Teaching papers:
Invited Talks:
- B. Li, D. Ghosh, E. A. Olevsky, K. Lu, F. Dong, J. Li, R. Wang, A. D. Dupuy, E. Torresani, Advances in Powder and Ceramic Materials Science 2023. The Minerals, Metals & Materials Series. Springer, ISBN: 978-3-031-22621-2, 140 pages, 2023.
- N. P. Bansal, J. P. Singh, A. Bhalla, M. M. Mahmoud, N. Jose Manjooran, G. Singh, K. Lu, G. Brennecka, Processing and Properties of Advanced Ceramics and Composites VI, Ceramic Transactions, Volume 249, ISBN: 978-1-118-99549-5, 375 pages, September 2014, Wiley.
- K. Lu, N. J. Manjooran, R. Murakam, and G. Pickrell, Advances in Synthesis, Processing and Applications of Nanostructures, Ceramic Transactions, Volume 238; ISBN: 978-1-1182-7327-2, August 2012, Wiley.
- K. Lu, N. Manjooran, M. Radovic, G. Pickrell, E. Medvedovski, E. A. Olevsky, C. Li, G. Singh, and N. Chopra, Advances in Nanomaterials and Nanostructures, Ceramic Transactions, Volume 229, ISBN: 978-1-118-06002-5, August 2011, Wiley.
- K. Lu, C. Li, Processing of Nanoparticle Materials and Nanostrfuctured Films, Ceramic Transactions, Volume 223, 2010, ISBN 978-0-470- 92731-1, Wiley.
- T. Hinklin, K. Lu, Processing of Nanoparticle Structures and Composites: Ceramic Transactions, Volume 208, ISBN: 978-0-470-40846-9, August 2009, Wiley.
Book Chapters:
1. K. Lu, K. Ning, “Nanoscale Sintering,” Metal Oxide Nanoparticles: Formation, Functional Properties and Interfaces, Metal Oxide Nanoparticles: Formation, Functional Properties and Interfaces, First Edition. Edited by Oliver Diwald and Thomas Berger. © 2021 John Wiley & Sons Ltd.
2. K. Lu, W. Li, and B. Chen, “Sintering of Porous Materials,” Sintering: Mechanisms of Convention Nanodensification and Field Assisted Processes, Editors: Ricardo H. R. Castro, Klaus van Benthem, Springer, Engineering Materials 35, 2013, Volume 35, 115-136, DOI: 10.1007/978-3-642-31009-6_6.
3. K. Lu, “Shaping of 3D Nanoceramics and Their Composites,” Handbook of Nanoceramics and Their Based Devices, American Scientific Publishers, Edited by T.Y. Tseng and H. S. Nalwa, vol. 2, p 151-177, ISBN:1-58883-116-7, Stevenson Ranch, CA, 2009.
4. K. Lu and X. Zhu, “Liquid Nanoparticles: Synthesis and Characterization,” Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publishers, Stevenson Ranch, CA, 2010. Editor: H. S. Nalwa, ISBN: 1-58883-146-7, Volume 15, 537-574, 2010.
Journal papers:
- H. Chaney, K. Lu, “ReaxFF Simulation of Pyrolysis Behaviors of Polysiloxane Precursors with Different Carbon Content,” Chemistry of Materials,
https://doi.org/10.1021/acs.chemmater.3c00010. - H. Chaney, Y. Zhou, K. Lu, “Understanding SiOC Atomic Structures via Synchrotron X-ray and Reactive Force Field Potential Studies,” Materials Today Chemistry, 29 101429, 2023
- Sk S. Hossain, K. Lu, “Recent Progress of Alumina Ceramics by Direct Ink Writing: Ink Design, Printing and Post-processing,” Ceramics International, 49 (7), 10199-10212, 2023.
- H. J. Choi, K. Lu, “A High Compatibility SiOCN Coating on Stainless Steel,” Journal of Materials Science, 58, 3790–3801, 2023.
- H. Chaney, K. Lu, “New Findings Related to Carbothermal Reduction of Polysiloxane-derived Ceramics,” Ceramics International, 49 (2023) 10193–10197.
- K. Lu, H. Chaney, “New Insight into SiOC Atomic Structure Evolution During Early Stage of Pyrolysis,” Journal of the American Ceramic Society,106, 2737–274, 2023.
- Y. Zhou, K. Lu, “Polymer-derived High Temperature Non-Oxide Materials: A Review,” Advanced Engineering Materials, 2023, 2200967 (24 pages).
- K. Lu, S. Singh, “In-situ TEM Study of Kr Ion Irradiation Tolerance of SiFeOC Nanocomposite,” Journal of the European Ceramic Society, 42 (15), 6942-6950, 2022.
- S. Singh, K. Lu, “Structural Evolution and Electrical Conductivity of Ti3C2-SiOC Ceramics,” Materials Science and Engineering B, 285, 115954, 2022.
- P. A. Loughney, S. B. Mujib, T. L. Pruyn, G. Singh, K. Lu, V. Doan-Nguyen, “Enhancing Organosilicon Polymer-Derived Ceramic Properties,” Journal of Applied Physics, 132, 070901, 2022.
- Y.-J. Cho, K. Sun, G. Was, K. Lu, “In-situ Microstructure Observation of Oxidized SiC Layer in Surrogate TRISO Fuel Particles Under Krypton Ion Irradiation,” Journal of Alloys and Compounds, 920(5), 165833, 2022.
- K. Lu, S. Singh, L. Shao, “Kr Ion Irradiation Study of Polymer Derived SiFeOC-C-SiC Nanocomposite,” Journal of the American Ceramic Society, 105, 5664– 5675, 2022.
- W. Wang. S. Tamakloe. Z. Deng, L. Li, W. Cai, K. Lu, “Effects of Processing Temperature on the Corrosion and Tribocorrosion Resistance of Perhydropolysilazane-Derived Coatings on AISI 304 Steel,” Surface & Coatings Technology, 439, 128463, 2022.
- S. Singh, K. Bawane, Z. Hu, L. Yang, Y. Chen, L. Shao, K. Lu, “Helium Ion Irradiation Effects on Microstructure Evolution and Mechanical Properties of Silicon Oxycarbide,” Ceramics International, 48 [11], 16063-16071, 2022.
- S. K. D. Singh, J.-F. Dietiker, K. Lu, “Polysiloxane Coatings on Microspheres Based on Multiphase Flow with Interface Exchange-Discrete Element Modelling,” Particuology, 69, 88-99, 2022.
- S. K. D. Singh, K. Lu, “SiOC Coatings on Yttria Stabilized Zirconia Microspheres Using a Fluidized Bed Coating Process,” Powder Technology, 396 (A), 158-166, 2022.
- N. Yang, C. Ophus, B. H. Savitzky, M. Scott, K. Bustillo, and K. Lu, “Amorphous and Crystalline Co-Existing SiOC Phase Analysis Using 4D-STEM,” Materials Characterization, 181, 111512, 2021.
- Y. J. Cho, D. Garcia, H. Yu, Z. Deng, L. Li, and K. Lu, “Oxidation Behaviors of Matrix-Grade Graphite During Water Vapor Ingress Accidents for High Temperature Gas-Cooled Reactors,” Carbon, 185(15), 161-176, 2021.
- A. Rau, K. Knott, and K. Lu, “Porous SiOC/SiC Ceramics Via an Active-Filler Catalyzed Polymer-Derived Method,” Materials Chemistry Frontiers, 5, 6530-6545, 2021.
- N. Yang, K. Lu, “Phase Content Prediction in Polymer-Derived Ceramics with Metal Additives,” Journal of the American Ceramic Society, 104, 5379-5391, 2021.
- Y. J. Cho, K. Lu, “Water Vapor Oxidation of SiC Layer in Surrogate TRISO Fuel Particles,” Composites Part B: Engineering, 215 (15) 108807, 2021.
- J. Zheng, K. Lu, “Electrically Conductive and Thermally Stable SiC-TiC Containing Nanocomposites via Flash Pyrolysis,” Journal of the American Ceramic Society, 104(6) 2460-2471, 2021.
- N. Yang, K. Lu, “Effects of Transition Metals on the Evolution of Polymer‐Derived SiOC ceramics,” Carbon, 171, 88-95, 2021.
- L. Kong, A. Rau, N. Yang, K. Lu, “ZnO Nanoparticle-Poly(methyl methacrylate) Hybrids as Flexible Ultraviolet Shielding Films,” JOM, 73(1), 432-440, 2021.
- K. Bawane, K. Lu, X. Bai, J. Hu, M. Li, P. M. Baldo, E. Ryan “Microstructural Evolution of a Silicon Carbide-Carbon Coated Nanostructured Ferritic Alloy Composite during In-Situ Kr Ion Irradiation at 300°C and 450°C,” Journal of Materials Science and Technology, 71 (30), 75-83, 2021.
- Y. J. Cho, K. Lu, “High Temperature Oxidation Behaviors of Bulk SiC with Low Partial Pressures of Air and Water Vapor in Argon,” Corrosion Science, 174, 108795 (8 pages), 2020.
- N. Yang, W. Wang, W. Cai, K. Lu, “Corrosion and Tribocorrosion Mitigation of Perhydropolysilazane-Derived Coatings on Low Carbon Steel,” Corrosion Science, 177, 108946 (11 pages), 2020.
- N. Yang, K. Lu, “Ultrahigh Surface Area SiOC Ceramics Based on Perhydropolysilazane and Polysiloxane,” Microporous and Mesoporous Materials, 306(15), 110477 (9 pages), 2020.
- Y. J. Cho, K. Lu, “Water Vapor Oxidation Behaviors of Nuclear Graphite IG-110 for a Postulated Accident Scenario in High Temperature Gas-Cooled Reactors,” Carbon, 164(30) 251-260, 2020.
- Y. J. Cho, L. Kong, R. Islam, and K. Lu, “Photothermal Self-Healing of Gold Nanoparticle-Polystyrene Hybrids,” Nanoscale, 12, 20726 (11 pages), 2020.
- Y. Bai, J. Zhao, Z. Lv, K. Lu, “Enhanced Piezocatalytic Performance of ZnO Nanosheet Microspheres by Enriching the Surface Oxygen Vacancies,” Journal of Materials Science, 55, 14112-14124, 2020.
- K. Lu, “Hybrid Materials--A Review on Co-Dispersion, Processing, Patterning, and Properties,” International Materials Reviews, 65(8) 463-501, 2020.
- K. Bawane, K. Lu, Q. Li, R. Bordia, “High Temperature Oxidation Behaviors of SiON Coated AISI 441 in Ar+O2, Ar+H2O, and Ar+CO2 Atmospheres,” Corrosion Science, 166 (15)108429 (7 pages), 2020.
- K. Bawane, K. Lu, “Microstructure Evolution for Nanostructured Ferritic Alloy with and without Cr3C2 Coated Silicon Carbide at High Temperatures,” Journal of Materials Science and Technology, 43(15) 126-134, 2020.
- J. Zhao, H. Yang, Y. Li, K. Lu, “Photocatalytic Activity of CdS Nanoparticles Enhanced by the Interaction between Piezotronic Effect and Phase Junction,” Journal of Alloys and Compounds, 815, 1524942 (9 pages), 2020.
- N. Yang, M. Gao, J. Li, K. Lu, “Nickel Crystallite-Containing Magnetoceramics from Water Assisted Pyrolysis of Polysiloxane and Nickel 2,4-Pentanedionate,” Journal of the European Ceramic Society, 103, 145–157, 2020.
- K. Ning, K. Lu, H. Ju, “Sintering Behaviors of Micron-Sized Features Based on 3D Reconstruction," Journal of Materials Science, 54, 14635–14644, 2019.
- K. Bawane, K. Lu, X. Bai, W.-Y. Chen, M. Li, “In-situ TEM Study of Microstructural Evolution in NFA and Cr3C2@SiC-NFA Composite during Ion Irradiation,” Materialia, 7, 100412 (12 pages), 2019.
- X. Zhang, X. Zhang, J. Duan, K. Lu, “The Preparation of In-Situ MoSi2-SiC-MoB Three-Phase Composite Completely Eliminating the PEST Phenomena,” Materials Chemistry and Physics, 235, 121730, 2019.
- D. Erb, K. Lu, “Synthesis of SiOC Using Solvent-Modified Polymer Precursors,” Materials Chemistry and Physics, 237, 121844 (6 pages), 2019.
- N. Yang, K. Lu, “Thermophysical Property and Electrical Conductivity of Titanium Isopropoxide – Polysiloxane Derived Ceramics,” Journal of the European Ceramic Society, 39 (14), 4029-4037, 2019.
- K. Ning, K. Lu, “Understanding Ion Irradiation Resistance of a Silicon Diffused Nanostructured Ferritic Alloy-Chromium Carbide–Carbon Composite,” Composites Part B, 167, 746-753, 2019.
- Y. Bai, J. Zhao, Y. Li, Z. Lv, K. Lu, “Preparation and Photocatalytic Performance of TiO2/PbTiO3 Fiber Composite Enhanced by External Force Induced Piezoelectric Field,” Journal of the American Ceramic Society, 102, 5415–5423, 2019.
- Y. Bai, J. Zhao, Z. Lv, K. Lu, “Enhanced Piezo-phototronic Effect of ZnO Nanorod Arrays for Harvesting Low Mechanical Energy,” Ceramics International, 45 (12) 15065-15072, 2019.
- K. Bawane, D. Erb, K. Lu, “Carbon Content and Pyrolysis Atmosphere Effects on Phase Development in SiOC Systems,” Journal of the European Ceramic Society, 39, 2846–2854, 2019.
- K. Lu, D. Erb, K. Bawane, N. Yang, “Comparison of Traditional and Flash Pyrolysis of Different Carbon Content Silicon Oxycarbides,” Journal of the European Ceramic Society, 39 (10), 3035-3041, 2019.
- Y. Lin, K. Lu, R. Davis, “Patterning of ZnO Quantum Dot and PMMA Hybrids with a Solvent Assisted Technique,” Langmuir, 35 (17) 5855-5863, 2019.
- L. Wang, K. Lu, R. Ma, “Effects of Different Polymer Precursors on the Characteristics of SiOC Bulk Ceramics,” Applied Physics A, 125, 395 (13 pages), 2019.
- K. Lu, M. Gervasio, “Simulation Study of Nanoparticle-Polymer Organic Suspension Stability,” Advanced Theory and Simulations, 2, 1900010 (14 pages), 2019. https://doi.org/10.1002/adts.201900010.
- L. Wang, K. Lu, “Phase Development of Silicon Oxycarbide Nanocomposites During Flash Pyrolysis,” Journal of Materials Science, 54(8), 6073-6087, 2019.
- M. Gervasio, K. Lu, “Monte Carlo Simulation Modeling of Nanoparticle-Polymer Co- Suspensions,” Langmuir, 35 (1), 161–170, 2019.
- K. Ning, K. Lu, R. Bortner, “High Dose Self-Ion Irradiated Silicon Carbide with Nanostructured Ferritic Alloy Aid,” Journal of Materials Science, 54(1), 605–612, 2019.
- M. Gervasio, K. Lu, “Sub-Micron Features from Polymer-Derived SiOC via Imprint Lithography,” Journal of the European Ceramic Society, 39, 825-831, 2019.
- K. Ning, H. Ju, K. Lu, “Effects of Ceramic Types on Evolution of Micron-Sized Features During Sintering,” Journal of the American Ceramic Society, 102(2) 569-577, 2019.
- J. Zhao, Y. Liu, Y. He, K. Lu, “Li4Ti5O12 Epitaxial Coating on LiNi0.5Mn1.5O4 Surface for Improving the Electrochemical Performance through Solvothermal-Assisted Processing,” Journal of Alloys and Compounds, 779 (30) 978-984, 2019.
- K. Shen, K. Lu, “Comparison of Different Perovskite Cathodes in Solid Oxide Fuel Cells,” Fuel Cells, 18(4), 457–465, 2018.
- H. Ju, K. Ning, K. Lu, “Atmosphere Effects on Micron-Sized ZnO Ridges During Sintering,” Journal of the European Ceramic Society, 38 (15), 5007-5014, 2018.
- R. Ma; K. Lu, D. Erb, “Effect of Solvent in Preparation of SiOC Bulk Ceramics,” Materials Chemistry and Physics, 218, 140-146, 2018.
- K. Ning, K. Lu, “Fundamental Understanding of Centrifugal Micromolding for High Fidelity Patterns,” Journal of the European Ceramic Society, 38 (15), 5167-5173, 2018.
- R. Ma, D. Erb, K. Lu, “Flash Pyrolysis of Polymer-Derived SiOC Ceramics,” Journal of the European Ceramic Society, 38 (15), 4906-4914, 2018.
- D. Erb, K. Lu, “Effect of Additive Structure and Size on SiO2 Formation in Polymer Derived SiOC Ceramics,” Journal of the American Ceramic Society, 101, 5378–5388, 2018.
- K. Bawane, K. Ning, K. Lu, “High Temperature Oxidation Behavior of Silicon Carbide- Carbon Coated Nanostructured Ferritic Alloy Composites in Water Vapor Environment,” Corrosion Science, 139, 206-214, 2018.
- K. Lu, L. Wang, “Accelerated Polymer to SiOC Nanocomposite Conversion,” Annals of Materials Science and Engineering, 3(1), 1030 (4 pages), 2018.
- K. Ning, K. Lu, “Water Vapor Thermal Treatment of Silicon Carbide-Nanostructured Ferritic Steel Alloy (SiC-NFA) Composite Materials,” Applied Surface Science, 452, 248-258, 2018.
- K. Ning, D. Bai, K. Lu, “Study of Self-Ion Irradiated Nanostructured Ferritic Alloy (NFA) and Silicon Carbide-Nanostructured Ferritic Alloy (SiC-NFA) Cladding Materials,” Nuclear Instruments and Methods in Physics Research B, 427, 44-52, 2018.
- D. Erb, K. Lu, “Effect of SiO2-forming Additive in Polysiloxane Derived SiOC Ceramics,” Microporous and Mesoporous Materials, 266, 75-82, 2018.
- K. Ning, K. Lu, “Ion Irradiation Effect on Spark Plasma Sintered Silicon Carbide Ceramics with Nanostructured Ferritic Alloy Aid,” Journal of the American Ceramic Society, 101, 3662–3673, 2018.
- D. Erb, K. Lu, “Influence of Vinyl Bonds from PDMS on the Pore Structure of Polymer Derived Ceramics,” Materials Chemistry and Physics, 209, 217-226, 2018.
- K. Ning, K. Lu, “Water Vapor Thermal Treatment Effects on Spark Plasma Sintered Nanostructured Ferritic Alloy-Silicon Carbide Systems,” Journal of the American Ceramic Society, 101, 2208–2215, 2018.
- K. Bawane, K. Ning, K. Lu, “High Temperature Treatment of Cr3C2@SiC-NFA Composites in Water Vapor Environment,” Corrosion Science, 131, 365-375, 2018.
- G. Li, M. R. von Spakovsky, F. Shen, K. Lu, “Multi-scale Transient and Steady State Study of the Influence of Microstructure Degradation and Chromium Oxide Poisoning on SOFC Cathode Performance,” Journal of Non-equilibrium Thermodynamics, 43(1) 21-42, 2018.
- H. Ju, K. Ning, K. Lu, “Sintering Behaviors of Micron-Sized Ceramic Rod Feature,” Acta Materialia, 144 (1) 534-542, 2018.
- K. Ning, Z. Hu, K. Lu, “Spark Plasma Sintering of SiC-NFA Composites with Carbon Barrier Layer,” Journal of Nuclear Materials, 498, 50-59, 2018.
- H. Ju, K. Ning, K. Lu, “Centrifuge-aided Micromolding of Micron- and Submicron-sized Patterns,” Journal of the European Ceramic Society, 38 (2), 637-645, 2018.
- K. Lu, D. Erb, “Polymer Derived Silicon Oxycarbide Coatings,” International Materials Reviews, 63 (3), 139–161, 2018.
- H. Ju, K. Ning, K. Lu, “Roughening and Destructive Effect of Sintering on Micron-Sized ZnO Features,” Acta Materialia, 141, 352-359, 2017.
- J. Zhao, Y. Li, Y. Wu, S. Lv, K. Lu, “Microstructure of TiO2 Porous Ceramics by Freeze Casting of Nanoparticle Suspensions,” Ceramics International, 43 (17), 14593-14598, 2017.
- M. Gervasio, K. Lu, “Suspension-based Imprint Lithography of ZnO-PMMA Hybrids,” Soft Matter, 13, 5569 – 5579, 2017.
- K. Lu, D. Erb, “Additive and Pyrolysis Atmosphere Effects on Polysiloxane-Derived Porous SiOC Ceramics,” Journal of the European Ceramic Society, 37 (15), 4547-4557, 2017.
- J. Zhao, C. Zhang, C. Hu, K. Lu, “Effect of Thermal Treatment on TiO2 Varistor Properties in Different Atmospheres,” Journal of the European Ceramic Society, 37, 3353–3359, 2017.
- K. Ning, Z. Hu, K. Lu, “Spark Plasma Sintering of Silicon Carbide (SiC)-Nanostructured Ferritic Alloy (NFA) Composites with Chromium Carbide Barrier Layer,” Materials Science and Engineering A, 700 (17) 183–190, 2017.
- M. Gervasio, K. Lu, “PMMA-ZnO Hybrid Arrays Using In-situ Polymerization and Imprint Lithography,” Journal of Materials Chemistry C, 121 (21), 11862–11871, 2017.
- M. Yao, J. Zhao, S. Lv, K. Lu, “Preparation and Hydrogenation of Urchin-Like Titanium Using a One-Step Hydrothermal Method,” Ceramics International, 43, 6925–6931, 2017.
- K. T. Faber, T. Asefa, M. Backhaus-Ricoult, R. Brow, J. Chan, S. Dillon, W. Fahrenholtz, M. W. Finnis, J. E. Garay, E. Garcia, Y. Gogotsi, S. M. Haile, J. Halloran, J. Hu, L. Huang, S. Jacobsen, E. Lara-Curzio, J. LeBeau, W. E. Lee, C. G. Levi, I. Levin, J. A. Lewis, D. M. Lipkin, K. Lu, J. Luo, J.-P. Maria, L. W. Martin, S. Martin, G. Messing, A. Navrotsky, N. Padture, C. Randall, G. S. Rohrer, A. Rozenflanz, T. Schaedler, D. Schlom, A. Sehirlioglu, A. Stevensen, T. Tani, V. Tikare, S. Trolier-McKinstry, H. Wang, and B. Yildiz, “The Role of Ceramic and Glass Science Research in Meeting Societal Challenges: A Report from an NSF-Sponsored Workshop on Emerging Opportunities,” Journal of the American Ceramic Society, 100, 1777–1803, 2017.
- F. Shen, K. Lu, “Co3O4/Sm-doped CeO2 (SDC)/Co3O4 Tri-layer Coating on AISI 441 Interconnect for Solid Oxide Fuel Cells,” ACS Applied Materials & Interfaces, 9 (7), 6022–6029, 2017.
- Z. Hu, K. Ning, K. Lu, “Study of Spark Plasma Sintered Silicon Carbide with Nanostructured Ferritic Alloy Addition,” Materials Science and Engineering A, 682, 13 586-592, 2017.
- F. Shen, K. Lu, “CoxFe1-x Oxide Coatings on AISI 441 for Solid Oxide Fuel Cells,” Journal of Power Sources, 330, 231-239, 2016.
- Y. Wu, J. Zhao, Y. Li, K. Lu, “Preparation and Freezing Behavior of TiO2 Nanoparticle Suspensions,” Ceramics International, 42, 15597–15602, 2016.
- K. Lu, D. Erb, M. Liu, “Phase Transformation, Oxidation Stability, and Electrical Conductivity of TiO2-Polysiloxane Derived Ceramics,” Journal of Materials Science, 51, 10166–10177, 2016.
- Z. Hu, K. Ning, K. Lu, “Study of Spark Plasma Sintered Nanostructured Ferritic Steel Alloy with Silicon Carbide Addiction,” Materials Science and Engineering A, 670, 75–80, 2016.
- F. Shen, K. Lu, “Perovskite-type La0.6Sr0.4Co0.2Fe0.8O3, Ba0.5Sr0.5Co0.2Fe0.8O3, and Sm0.5Sr0.5Co0.2Fe0.8O3 Cathode Materials for Solid Oxide Fuel Cells,” Electrochemical Acta, 211, 445–452, 2016.
- J. Zhao, Y. He, L. Zhang, K. Lu, “Preparation of Porous TiO2 Powder with Mesoporous Structure by Freeze-drying Method,” Journals of Alloys and Compounds, 678, 36-41, 2016.
- K. Lu, D. Erb, M. Liu, “Thermal Stability and Electrical Conductivity of Carbon-Enriched Silicon Oxycarbide,” Journal of Materials Chemistry C, 4, 1829-1837, 2016.
- K. Lu, J. Li, “Fundamental Understanding of Water Vapor Effect on SiOC Evolution during Pyrolysis,” Journal of the European Ceramic Society, 36, 411–422, 2016.
- F. Shen, K. Lu, “Comparative Study of La0.6Sr0.4Co0.2Fe0.8O3, Ba0.5Sr0.5Co0.2Fe0.8O3 and Sm0.5Sr0.5Co0.2Fe0.8O3 Cathodes and the Effect of Sm0.2Ce0.8O2 Block Layer in Solid Oxide Fuel Cells,” International Journal of Hydrogen Energy, 40, 16457-16465, 2015.
- K. Lu, “Porous and High Surface Area SiOC Materials-A Review,” Materials Science and Engineering-R, 97, 23–49, 2015.
- M. Gervasio, K. Lu, R. Davis, “Experimental and Modeling Study of Solvent Diffusion in PDMS Stamp for Nanoparticle-Polymer Co-suspensions,” Langmuir, 31(36), 9809–9816, 2015.
- F. Shen, K. Lu, “La0.6Sr0.4Co0.2Fe0.8O3 Cathodes Incorporated with Sm0.2Ce0.8O2 by Three Different Methods for Solid Oxide Fuel Cells,” Journal of Power Sources, 296(20), 318–326, 2015.
- J. Li, K. Lu, “Highly Porous SiOC Bulk Ceramics with Water Vapor Assisted Pyrolysis,” Journal of the American Ceramic Society, 98(8), 2357–2365, 2015.
- J. Li, K. Lu, T. Lin, K. Shen, “Preparation of Micro-/Meso-porous SiOC Bulk Ceramics,” Journal of the American Ceramic Society, 98(6), 1753–1761, 2015.
- K. Lu, M. Liu, M. Gervasio, “Nanoparticle and Poly(methyl methacrylate) Co-dispersion in Anisole," Journal of Materials Science, 50(14), 4836-4844, 2015.
- J. Zhao, L. Zhang, W. Xing, and K. Lu, “A Novel Method to Prepare B/N co-doped Anatase TiO2,” Journal of Physical Chemistry, 119, 7732−7737, 2015.
- J. Zhao, K. Zhang, Y. Lin, K. Lu, “Preparation of Separated and Open End TiO2 Nanotubes,” Ceramics International, 41, 7235–7240, 2015.
- J. Zhao, W. Xing, Y. Li, K. Lu, “Solvothermal Synthesis and Visible Light Absorption of Anatase TiO2 (001) Facets,” Materials Letters, 145, 332–335, 2015.
- G. Kaur, V. Kumar, G. Pickrell, K. Lu, “Interfacial Compatibility of Alumino-Borosilicate Glass Sealants with AISI 441 and YSZ for Different Atmospheres,” International Journal of Hydrogen Energy, 40 (2) 1195–1202, 2015.
- F. Shen, K. Lu, “Moisture Effect on La0.8Sr0.2MnO3 and La0.6Sr0.4Co0.2Fe0.8O3 Cathode Behaviors in Solid Oxide Fuel Cells,” Fuel Cells, 15, 105–114, 2015.
- V. Kumar, G. Kaur, K. Lu, O. P. Pandey, K. Singh, “Effect of Thermal Treatment on Chemical Interaction Between Yttrium Borosilicate Glass Sealants and YSZ for Planar Solid Oxide Fuel Cells,” International Journal of Applied Glass Science, 5(4) 410–420, 2014.
- J. Z. Zhao, B. X. Wang, K. Lu, “Influence of Ta2O5 Doping and Microwave Sintering on TiO2-based Varistor Properties,” Ceramics International, 40, 14229–14234, 2014.
- K. Lu, F. Shen, R. Roberts, G. Doucette, M. McGuire, W. Li, “(LaSr)xMnO3 Cathode Stoichiometry Effects on Electrochemical Performance in Contact with AISI 441 Steel Interconnect,” Journal of Power Sources, 268 (15) 379–387, 2014.
- Z. Hu, K. Lu, “Evolution of Pores and Tortuosity During Sintering,” Journal of the American Ceramic Society, 97(8), 2383–2386, 2014.
- K. Lu, F. Shen, “Effect of Stoichiometry on (La0.6Sr0.4)xCo0.2Fe0.8O3 Cathode Evolution in Solid Oxide Fuel Cells,” Journal of Power Sources, 267, 421–429, 2014.
- V. Kumar, O. P. Pandey, K. Singh, K. Lu, “Interaction Study of Yttria Based Glasses with High Temperature Electrolyte for SOFC,” Fuel Cells, 14(4), 635–644, 2014.
- K. Lu, “Effects of Nb2O5 as Seeds and Trisodium Citrate as Suppressing Agent on LiNbO3 Formation,” Materials Letters, 126, 63–66, 2014.
- K. Lu, F. Shen, “Long Term Behaviors of La0.8Sr0.2MnO3 and La0.6Sr0.4Co0.2Fe0.8O3 as Cathodes for Solid Oxide Fuel Cells,” International Journal of Hydrogen Energy, 39, 7963-7971, 2014.
- K. Lu, W. Li, “Study of an Intermediate Temperature Solid Oxide Fuel Cell Sealing Glass System,” Journal of Power Sources, 245, 752-757, 2014.
- K. Lu, “Nanomaterials: Bringing New Excitements to the Energy World,” Annals of Material Science and Engineering, 1(1), 1-2, 2014.
- B. Chen, Z. Xia, K. Lu, “Understanding Sintering Characteristics of ZnO Nanoparticles by FIB-SEM Three-Dimensional Analysis,” Journal of the European Ceramic Society, 33, 2499–2507, 2013.
- B. Chen, J. Hou, K. Lu, “Formation Mechanism of TiO2 Nanotubes and Their Applications in Photoelectrochemical Water Splitting and Supercapacitors,” Langmuir, 29(19), 5911– 5919, 2013.
- Z. Xia, B. Chen, K. Lu, “3D Microstructure Construction of Sintered ZrO2 under Different Sintering Conditions,” Journal of Materials Science, 48(17), 5852-5861, 2013.
- W. Li, K. Lu, J. Y. Walz, “Effects of Solids Loading on Sintering and Properties of Freeze- Cast Kaolinite-Silica Porous Composites,” Journal of the American Ceramic Society, 96, 1763–1771, 2013.
- W. Li, K. Lu, Z. Xia, “Interaction of (La1-xSrx)nCo1-yFeyO3-δ Cathodes and AISI 441 Interconnect for Solid Oxide Fuel Cells,” Journal of Power Sources, 237, 119-127, 2013.
- W. Li, K. Lu, J. Y. Walz, M. Anderson, “Effects of Rod-like Particles on the Microstructure and Strength of Freeze-cast Silica Nanoparticle Composites,” Journal of the American Ceramic Society, 96, 398–406, 2013.
- B. Chen, K. Lu, “Selective Focused-ion-beam Sculpting of TiO2 Nanotubes and Mechanism Understanding,” Physical Chemistry Chemical Physics, 15(6), 1854 –1862, 2013.
- B. Chen, K. Lu, K. Ramsburg, “ZnO Sub-Micrometer Rod Array by Soft Lithographic Micromolding with High Solid Loading Nanoparticle Suspension,” Journal of the American Ceramic Society, 96(1), 73–79, 2013.
- W. Li, K. Lu, J. Y. Walz, “Fabrication of Porous Nanocomposites with Controllable Specific Surface Area and Strength via Suspension Infiltration,” Langmuir, 28(47), 16423– 16429, 2012.
- K. Lu, Y. Liang, W. Li, “Hindered Sintering Behaviors of Titania Nanoparticle-based Materials,” Materials Letters, 89, 77–80, 2012.
- W. Li, K. Lu, J. Y. Walz, “Effects of Added Kaolinite on the Strength and Porosity of Freeze-Cast Kaolinite-Silica Nanocomposites,” Journal of Materials Science, 47(19), 6882-6890, 2012.
- K. Lu, “Newfound Capability of Focused Ion Beam Patterning Guided Anodization,” Electrochimica Acta, 63, 256–262, 2012.
- Y. Liang, K. Lu, “Titania Nanoparticle Suspension for Fabrication of Micron Feature Arrays via a Template-assisted Approach,” International Journal of Applied Ceramic Technology, 9 (5), 911–919, 2012.
- B. Chen, K. Lu, “Hierarchically Branched Titania Nanotubes with Tailored Diameters and Branch Numbers,” Langmuir, 28(5), 2937-2943, 2012.
- T. Jin, K. Lu, “Chromium Deposition and Interfacial Interactions of an Electrolyte-Air Electrode-Interconnect Tri-layer for Solid Oxide Fuel Cells,” Journal of Power Sources, 202, 143– 148, 2012.
- W. Li, K. Lu, J. Y. Walz, “Effects of Added Kaolinite on Sintering of Freeze-Cast Kaolinite-Silica Nanocomposite I. Microstructure and Phase Transformation,” Journal of the American Ceramic Society, 95, 883–891, 2012.
- T. Jin, K. Lu, “Surface and Interface Behaviors of Sr-doped Lanthanum Manganite Air Electrode in Different Moisture Atmospheres,” Journal of Power Sources, 197, 20-27, 2012.
- W. Li, K. Lu, J. Y. Walz, “Freeze Casting of Porous Materials-A Review of Critical Factors in Microstructure Evolution,” International Materials Reviews, 57(1), 37-60, 2012.
- K. Lu, T. Jin, “Surface Devitrification of a High Temperature Sealing Glass,” Materials Research Innovations, 15(6), 386-390, 2011.
- B. Chen, K. Lu, Z. Tian, “Understanding Focused Ion Beam Guided Anodic Alumina Nanopore Development,” Electrochimica Acta, 56, 9802– 9807, 2011.
- B. Chen, K. Lu, “Influence of Patterned Concave Depth and Surface Curvature on Anodization of Titania Nanotubes and Alumina Nanopores,” Langmuir, 27(19), 12179– 12185, 2011.
- B. Chen, K. Lu, J. A. Geldmeier, “Highly Ordered Titania Nanotube Arrays with Square, Triangular, and Sunflower Structures,” Chemical Communications, 47 (36), 10085-10087, 2011.
- B. Chen, K. Lu, “Moiré Pattern Nanopore and Nanorod Arrays by Focused Ion Beam Guided Anodization and Nanoimprint Molding,” Langmuir, 27(7), 4117–4125, 2011.
- M. K. Mahapatra, K. Lu, “Sealing Evaluation of an Alkaline Earth Silicate Glass for Solid Oxide Fuel/Electrolyzer Cells,” Fuel Cells, 11(3), 436–444, 2011.
- K. Lu, C. Hammond, “Nanoparticle-based Surface Templating,” International Journal of Applied Ceramic Technology, 8(4), 965–976, 2011.
- T. Jin, K. Lu, “Surface and Interface Behaviors of (La0.8Sr0.2)xMnO3 Air Electrode for Solid Oxide Cells,” Journal of Power Sources, 196, 8331– 8339, 2011.
- K. Lu, Z. Tian, J. A. Geldmeier, “Polishing Effect on Anodic Titania Nanotube Formation,” Electrochimica Acta, 56, 6014– 6020, 2011.
- B. Chen, K. Lu, Z. Tian, “Effects of Titania Nanotube Distance and Arrangement during Focused Ion Beam Guided Anodization,” Journal of Materials Chemistry, 21(24), 8835 – 8840, 2011.
- T. Jin, K. Lu, “Chemical Compatibility between Sr-doped Lanthanum Manganite Air Electrode and AISI 441 Interconnect,” International Journal of Hydrogen Energy, 36, 4440-4448, 2011.
- B. Chen, K. Lu, Z. Tian, “Novel Patterns by Focused Ion Beam Guided Anodization,” Langmuir, 27(2), 800–808, 2011.
- W. Li, K. Lu, J. Y. Walz, “Formation, Structure and Properties of Freeze-Casted Kaolinite-Silica Nanocomposites,” Journal of the American Ceramic Society, 94(4), 1256–1264, 2011.
- M. K. Mahapatra, K. Lu, “Seal Glass Compatibility with Bare and (Mn,Co)3O4 Coated Crofer 22 APU Alloy in Different Atmospheres,” Journal of Power Sources, 196, 700– 708, 2011.
- M. K. Mahapatra, K. Lu, “Effect of Atmosphere on Interconnect-Seal Glass Interaction for Solid Oxide Fuel/Electrolyzer Cells,” Journal of the American Ceramic Society, 94(3), 875–885, 2011.
- Z. Tian, K. Lu, B. Chen, “Fundamental Mechanisms of Focused Ion Beam Guided Anodization,” Journal of Applied Physics, 108, 094306-1-7, 2010.
- Z. Tian, K. Lu, B. Chen, “Unique Nanopore Pattern Formation by Focused Ion Beam Guided Anodization,” Nanotechnology, 21, 405301-1-7, 2010.
- M. K. Mahapatra, K. Lu, “Seal Glass Compatibility with Bare and (Mn,Co)3O4 Coated AISI 441 Alloy in Solid Oxide Fuel/Electrolyzer Cell Atmospheres,” International Journal of Hydrogen Energy, 35, 11908-11917, 2010.
- B. Chen, K. Lu, Z. Tian, “Gradient and Alternating Diameter Nanopore Templates by Focused Ion Beam Guided Anodization,” Electrochimica Acta, 56, 435–440, 2010.
- M. K. Mahapatra, K. Lu, “Seal Glass for Solid Oxide Fuel Cells,” Journal of Power Sources, 195(21), 7129–7139, 2010.
- M. K. Mahapatra, K. Lu, X. Liu, J. Wu, “Compatibility of A Seal Glass with (Mn,Co)3O4 Coated Interconnects: Effect of Atmosphere,” International Journal of Hydrogen Energy, 35, 7945-7956, 2010.
- K. Lu, J. Zhao, “Focused Ion Beam Lithography and Anodization Combined Nanopore Patterning,” Journal of Nanoscience and Nanotechnology, 10(10), 6760-6768, 2010.
- K. Lu, R. M. German, “Microstructure Analysis of Samples Sintered at Different Gravitational Conditions,” Journal of Materials Science, 45, 4454–4461, 2010.
- K. Lu, J. Zhao, “Equiaxed Zinc Oxide Nanoparticle Synthesis,” Chemical Engineering Journal, 160, 788–793, 2010.
- T. Jin, K. Lu, “Compatibility between AISI441 Alloy Interconnect and Representative Seal Glasses in Solid Oxide Fuel/Electrolyzer Cells,” Journal of Power Sources, 195, 4853-4864, 2010.
- M. K. Mahapatra, K. Lu, “Glass-based Seals for Solid Oxide Fuel and Electrolyzer Cells-A Review,” Materials Science and Engineering R, 67, 65–85, 2010.
- K. Lu, C. Hammond, J. Qian, “Surface Patterning Nanoparticle-Based Arrays,” Journal of Materials Science, 45, 582–588, 2010.
- T. Jin, K. Lu, “Thermal Stability of a New Solid Oxide Fuel/Electrolyzer Cell Seal Glass,” Journal of Power Sources, 195, 195–203, 2010.
- M. K. Mahapatra, K. Lu, “Thermochemical Compatibility of a Seal Glass with Different Solid Oxide Cell Components,” International Journal of Applied Ceramic Technology, 7(1), 10-21, 2010.
- M. K. Mahapatra, K. Lu, “Interfacial Study of Crofer 22 APU Interconnect-SABS-0 Seal Glass for Solid Oxide Fuel/Electrolyzer Cells,” Journal of Materials Science, 44(20), 5569-5578, 2009.
- K. Lu, X. Zhu, K. Nagarathnam, “Nickel-Boron Nanolayer Coated Boron Carbide Pressureless Sintering,” Journal of the American Ceramic Society, 92(7), 1500–1505, 2009.
- K. Lu, “Hierarchical and Nanosized Pattern Formation Using Dual Beam Focused Ion Beam Microscope,” Journal of Nanoscience and Nanotechnology, 9(4), 2598-2602, 2009.
- J. Qian, K. Lu, “Multiwall Carbon Nanotube and TiO2 Sol Assembly,” Journal of Nanoscience and Nanotechnology, 9, 1-7, 2009.
- M. K. Mahapatra, K. Lu, and R. J. Bodnar, “Network Structure and Thermal Property Relation of a Novel High Temperature Seal Glass,” Applied Physics A, 95, 493–500, 2009.
- X. Zhu, K. Lu, K. Nagarathnam, “Compaction of Different Boron Carbide Powders Using Uniaxial Die Compaction and Combustion Driven Compaction,” Journal of Materials Science, 44, 414–421, 2009.
- K. Lu, M. Hiser, W. Wu, “Effect of Particle Size on Three Dimensional Printed Mesh Structures,” Powder Technology, 192, 178–183, 2009.
- K. Lu, X. Zhu, “Nickel-Boron Nanolayer Evolution on Boron Carbide Particle Surfaces during Thermal Treatment,” Thin Solid Films, 517, 4479-4483, 2009.
- H. Dong, K. Lu, “Attaching Titania Nanoparticles onto Shortened Carbon Nanotubes by Electrostatic Attraction,” International Journal of Applied Ceramic Technology, 6(2), 216–222, 2009.
- K. Lu, “A Study of Engineering Freshmen on Perception of Nanotechnology,” Journal of STEM Education, 10(1-2), 7-16, 2009.
- K. Lu, M. K. Mahapatra, “Network Structure and Thermal Stability Study of High Temperature Seal Glass,” Journal of Applied Physics, 104, 074910-1-9, 2008.
- M. Mahapatra, K. Lu “Effects of Nickel on Network Structure and Thermal Properties of a New Solid Oxide Cell Seal Glass,” Journal of Power Sources, 185, 993–1000, 2008.
- H. Dong, X. Zhu, K. Lu, “Morphology and Composition of Nickel-Boron Nanolayer Coating on Boron Carbide Particles,” Journal of Materials Science, 43, 4247-4256, 2008.
- H. Zhang, Z. An, F. Li, Q. Tang, K. Lu, W. Li, “Synthesis and Characterization of Mesoporous c-ZrO2 Microspheres Consisting of Peanut-like Nano-grains,” Journal of Alloys and Compounds, 464, 569-574, 2008.
- M. K. Mahapatra, K. Lu, W. T. Reynolds, “Thermophysical Properties and Devitrification of SrO-La2O3-Al2O3-B2O3-SiO2 Based Glass Sealant for Solid Oxide Fuel/Electrolyzer Cells,” Journal of Power Sources, 179, 106-112, 2008.
- K. Lu, W. T. Reynolds, “3DP Process for Fine Mesh Structure Printing,” Powder Technology, 187, 11-18, 2008.
- C. Story, K. Lu, W. T. Reynolds Jr., D. Brown, “Shape Memory Alloy/Glass Composite Seal for Solid Oxide Fuel Cells,” International Journal of Hydrogen Energy, 33 (14), 3970-3975, 2008.
- X. Zhu, H. Dong, K. Lu, “Coating Different Thickness Nickel-Boron Nanolayers onto Boron Carbide Particles,” Surface and Coatings Technology, 202, 2927-2934, 2008.
- K. Lu, “Sintering of Nanoceramics,” International Materials Review, 53(1), 21-38, 2008.
- K. Lu, X. Zhu, “Freeze Casting as a Nanoparticle Material Forming Method,” International Journal of Applied Ceramic Technology, 5(3), 219–227, 2008.
- K. Lu, “Freeze Cast Carbon Nanotube-Alumina Nanoparticle Green Composites,” Journal of Materials Science, 43(2), 652-659, 2008.
- K. Lu, “Theoretical Analysis of Colloidal Interaction Energy in Nanoparticle Suspensions,” Ceramics International, 34 (6), 1353-1360, 2008.
- K. Lu, “Microstructural Evolution of Nanoparticle Aqueous Colloidal Suspensions during Freeze Casting,” Journal of the American Ceramic Society, 90(12), 3753-16423, 2007.
- K. Lu, “Rheological Behavior of Carbon Nanotube-Alumina Nanoparticle Dispersion Systems,” Powder Technology, 177, 154–161, 2007.
- K. Lu, C. S. Kessler, and R. M. Davis, “Optimization of a Nanoparticle Suspension for Freeze Casting,” Journal of the American Ceramic Society, 89(8), 2459-2465, 2006.
- K. Lu, C. S. Kessler, “Colloidal Dispersion and Rheology Study of Nanoparticles,” Journal of Materials Science, 41(17), 5613-5618, 2006.
- K. Lu, W. X. Li, and J. J. Lannutti, “Density Gradients and the Expansion-Shrinkage Transition during Sintering,” Acta Materialia, 52, 2057-2066, 2004.
- Xu, X, K. Lu, and R. M. German, “Densification and Strength Evolution in Solid-State Sintering, Part II Strength Model,” Journal of Materials Science, 37, 117-126, 2002.
- K. Lu, R. M. German, and X. Xu, “Microstructural Evolution and Macroscopic Behavior during Solid State Sintering,” Powder Metallurgy, 44(4), 363-368, 2001.
- K. Lu, R. M. German, and R. G. Iacocca, “Presintering Effects on Ground-based and Microgravity Liquid Phase Sintering,” Metallurgical and Materials Transactions, 32A (8), 2097-2107, 2001.
- K. Lu, X. Xu, W. Yi, and R. M. German, “Porosity Effect on Densification and Shape Distortion in Liquid Phase Sintering,” Materials Science and Engineering, 318, 111-121, 2001.
- K. Lu, R. M. German, and B. M. Marx, “Liquid Phase Sintering of Tungsten Heavy Alloys,” International Journal of Powder Metallurgy, 37(6), 45-56, 2001.
- W. Yi, X. Xu, K. Lu, R. M. German, “Green Microstructure Effects on Densification and Distortion in Liquid Phase Sintering,” International Journal of Refractory Metals & Hard Materials, 19, 149-158, 2001.
- K. Lu and R. M. German, “Multiple Grain Growth Events in Liquid Phase Sintering,” Journal of Materials Science, 36(14), 3385-3394, 2000.
- B. M. Marx, K. Lu and R. M. German, “Macropore Evolution in Microgravity Sintered Samples,” The International Journal of Powder Metallurgy, 37, 11-12, 2001.
- K. Lu, and J. J. Lannutti, “Effect of Density Gradients on Dimensional Tolerance during Binder Removal,” Journal of the American Ceramic Society, 83(10), 2536-2542, 2000.
- K. Lu, and J. J. Lannutti, “Density Gradients and Sintered Dimensional Tolerance in Compacts Formed from Spray-Dried Alumina,” Journal of the American Ceramic Society, 83(6), 1393-1398, 2000.
- K. Lu, J. J. Lannutti, P. Klobes, and K. Meyer, “X-ray Computed Tomography and Mercury Porosimetry for Evaluation of Density Evolution and Porosity Distribution,” Journal of the American Ceramic Society, 83(3), 518-522, 2000.
Technical papers:
- K. Ning, Z. Hu, K. Lu, “Fabrication of New NFA-SiC Composites for Nuclear Applications,” 2016 American Nuclear Society Winter Meeting Proceeding, ISBN: 978-0- 89448-732-3.
- K. Lu, W. Li, G. Li, “Understanding Diamond Nanoparticle Evolution During Zirconia Spark Plasma Sintering,” Proceeding of the 38th Int'l Conf & Expo on Advanced Ceramics & Composites (ICACC 2014), Daytona Beach, Florida, January 26-31, 2014. Editors: A. Gyekenyesi, M. Halbig.
- W. Li, M. Anderson, K. Lu, J. Y. Walz, “Fabrication of Porous Mullite by Freeze Casting and Sintering of Alumina-Silica Nanoparticles,” Advances in Synthesis, Processing, and Applications of Nanostructures, Proceeding of Materials Science & Technology 2011 Conference and Exhibit (MS&T '11), October 16-20, 2011, Columbus, OH, Ceramic Transactions, Vol 238, John Wiley & Sons, 2012, Editors: K. Lu, N. Manjooran, R. Murakami, G. Pickrell, page 57-64.
- K. Lu, B. Chen, “Single Nanometer TiO(2) Particle Synthesis and Soft Lithographic Molding,” Proceedings of 2011 NSF Engineering Research and Innovation Conference, Atlanta, Georgia, January 4-7, 2011.
- K. Lu, B. Chen, Z. Tian, “Directed Patterning: Focused Ion Beam Guided Anodization,” Proceedings of 2011 NSF Engineering Research and Innovation Conference, Atlanta, Georgia, January 4-7, 2011.
- W. Li, K. Lu, J. Y. Walz, “Freezing Behavior and Properties of Freeze Cast Kaolinite- Silica Porous Nanocomposite,” Ceramic Transactions, Proceeding of Materials Science & Technology 2010 Conference and Exhibit (MS&T '10), October 17-21, 2010, Houston, TX, John Wiley & Sons, 2011, p57-68.
- B. Chen, K. Lu, Z. Tian, “Effect of Focused Ion Beam Patterning on Enlarging Anodization Window and Interpore Distance for Ordered Porous Anodic Alumina,” Ceramic Transactions, Proceeding of Materials Science & Technology 2010 Conference and Exhibit (MS&T '10), October 17-21, 2010, Houston, TX, John Wiley & Sons, 2011, p3-11.
- J. Walz, K. Lu, “Properties of Freeze-Casted Composites of Silica and Kaolinite,” Editors: K. Lu, C. Li, E. Medvedovski, E. A. Olevsky, Processing of Nanoparticle Materials and Nanostructured Films, Ceramic Transactions, Volume 223, 2010, ISBN 978-0-470-92731- 1, Wiley-Blackwell, p79-86.
- J. Zhao, K. Lu, B. Chen, Z. Tian, “Patterning by Focused Ion Beam Assisted Anodization,” Editors: K. Lu, C. Li, E. Medvedovski, E. A. Olevsky, Processing of Nanoparticle Materials and Nanostructured Films, Ceramic Transactions, Volume 223, ISBN 978-0- 470-92731-1, Wiley-Blackwell, p47-56, 2010.
- K. Lu, Chase Hammond, “Nanoparticle-based Array Creation by Templating,” Proceedings of 2009 NSF Engineering Research and Innovation Conference, Honolulu, Hawaii, June 22-25, 2009.
- K. Lu, X. Zhu, “Ni-B Nanolayer Evolution on Boron Carbide Particle Surfaces at High Temperatures,” Processing of Nanoparticle Structures and Composites: Ceramic Transactions, Vol. 208, 133-141, Editors: T. Hinklin, K. Lu, 2009, John Wiley & Sons.
- K. Lu, C. Hammond, “Nanoparticle-based Bulk Material Templating,” Processing of Nanoparticle Structures and Composites: Ceramic Transactions, Vol. 208, 1-10, Editors: T. Hinklin, K. Lu, 2009, John Wiley & Sons.
- X. Zhu, K. Lu, H. Dong, C. Glomb, E. Logan, K. Nagarathnam, “Applying Nickel Nanolayer Coating onto B4C Particles for Processing Improvement,” 32nd International Cocoa Beach Conference and Exposition on Advanced Ceramics and Composites, January, 2008, Daytona Beach, FL. Ceramic Engineering and Science Proceedings, 29(8), 117-129, 2008, Editors: Tatsuki Ohji, Andrew Wereszczak.
- K. Lu, X. Zhu, K. Nagarathnam, “Coating Ni-B Nanolayer onto Boron Carbide Particles for High Density Forming,” Proceedings of 2008 NSF Engineering Research and Innovation Conference, Knoxville, Tennessee, Jan. 7-10, 2008.
- M. K. Mahapatra, C. Story, K. Lu, W. T. Reynolds, “Glass-Ceramic Seal Stability Study for Solid Oxide Electrolyer/Fuel Cells,” Proceeding of Materials Science and Technology 2007 Conference, September 16-20, 2007, Detroit, Michigan, Energy: Fuel Cells: Materials, Processing, Manufacturing and Power Management Technologies, Organized by P. Singh, A-M. Azad, D. C. Collins, P. N. Kumta, C. Legzdins, A. Manthiram, A. Manivannan, S. K. Sundaram, and Z. G. Yang. p371-380.
- X. J. Zhu, K. Lu, “Electroless Nickel Coating of Boron Carbide Particles,” Proceeding of 2006 Materials Science & Technology International Conference, Cincinnati, OH, October 15-19, 2006. Innovative Processing and Synthesis of Ceramics, Glasses and Composites, Organized by N.P. Bansal, and J.P. Singh, 421-431, vol. 4.
- K. Lu, “Carbon Nanotube and Alumina Nanoparticle Suspension and Freeze Casting Study,” Proceeding of 2006 Materials Science & Technology International Conference, Cincinnati, OH, October 15-19, 2006. vol. 2, 463-471, Nanomaterials: Science and Technology, Organized by S. Mathur, R.M. Laine, M.Z. Hu, J. Vartuli, O.B. Koper.
- K. Lu, C. S. Kessler, “Nanoparticle Colloidal Suspension Optimization and Freeze-Cast Forming,” Ceramic Engineering and Science Proceedings, Synthesis and Processing of Nanostructured Materials, Vol. 27, Is. 8, 2006, p1-10, Ed. W. M. Mullins, A. Wereszczak, and E. Lara-Curzio, Proceeding of 30th International Conference on Advanced Ceramics and Composite, American Ceramic Society, Cocoa Beach, FL.
- Y. He, R. S. Engel, N. J. Salamon, S. Lindner, K. Lu, “Numerical Simulation for 316L Stainless Steel Powder Die Compaction Process,” 2001 Fine Powder Processing International Conference Proceedings, p153-166, 2001, University Park, PA 16802.
- W. Yi, K. Lu, and R. M. German, “Shape Distortion and Dimensional Precision in Tungsten Heavy Alloy Liquid Phase Sintering.” Proceeding of 15th International Plansee Seminar, G. Kneringer et. al, ed., Plansee AG, Reutte 2001.
Teaching papers:
- C. B. Burgoyne, M. Roman, C. Evia, C. Suchicital, K. Lu, J. Jinscheck, “Work-in-Progress: Development and Implementation of a Web-Based Teaching Resource Site to Prepare International Teaching and Research Faculty for the American Classroom,” Proceeding of ASEE/IEEE Frontiers in Education Conference (San Diego, CA, October 28-31, 2006), pp. M4G1-M4G2.
- K. Lu, C. S. Kessler, “Nanotechnology Readiness among a Diverse Student Population,” Proceeding of Mid-Atlantic Conference on the Scholarship of Diversity, Roanoke, VA, March 17-18, 2005.
Invited Talks:
- K. Lu, H. J. Choi, “Corrosion Resistant Coatings on Steel for Nuclear Energy Applications,” Materials Science & Technology 2023, Columbus, OH, October 1-4, 2023.
- K. Lu, H. J. Choi, “Corrosion Resistant SiOCN Coatings on Steel with Repair Capability,” 2023 TMS Annual Meeting & Exhibition, San Diego, CA, March 19–23, 2023.
- H. J. Choi, K. Lu, “SiOCN Corrosion Resistant Coatings on Stainless Steel,” Materials Science & Technology 2022, Pittsburgh, PA, October 9-13, 2022.
- K. Lu, Y. J. Cho, “SiC Oxidation and Irradiation Resistance in Advanced Nuclear Reactor TRISO Fuel,” Materials Science & Technology 2022, Pittsburgh, PA, October 9-13, 2022.
- K. Lu, H. J. Choi, W. B. Wang, R. Cai, “Synthesis and Corrosion Study of Polymer-Derived Ceramic Coatings on 304 Stainless Steel,” Pan American Ceramics Congress and Ferroelectrics Meeting of Americas (PACC-FMAs 2022), Panama City, Panama, virtual, July 24-28, 2022.
- K. Lu, “Sintering Behaviors of Micron-Sized Features,” Pan American Ceramics Congress and Ferroelectrics Meeting of Americas (PACC-FMAs 2022), Panama City, Panama, virtual, July 24-28, 2022.
- K. Lu, S. Singh, “Structural evolution and electrical conductivity of polymer derived ceramics,” TMS 2022 Annual Meeting & Exhibition, Anaheim, California, February 27–March 3, 2022.
- K. Lu, “Silicon Oxycarbide Materials,” Rutgers University Departmental Seminar, April 6, 2021.
- K. Bawane, K. Lu, X.-M. Bai, K. Ning, W.-Y. Chen, M. Li, “High temperature corrosion and irradiation behavior of silicon carbide and nanostructured ferritic alloy composites,” TMS 2021 Annual Meeting & Exhibition, virtual, March 14-18, 2021.
- K. Lu, J. Zheng, N. Yang, “Electrically conductive SiOC and TiC-SiOC nanocomposites via flash pyrolysis,” 45th International Conference & Exposition on Advanced Ceramics & Composites (ICACC), Feb 8–12, 2021, virtual.
- K. Lu, “Polymer derived silicon oxycarbides - A new generation of novel materials,” Webinar on Materials Science, Engineering and Technology, October 17, 2020.
- K. Lu, N. Yang, J. Zheng, “Effects of Transition Metals and External Field on the Evolution of Polymer-Derived Si-O-C ceramics,” Materials Science and Engineering 2020 Conference, virtual, October 4-8, 2020.
- N. Yang, K. Lu, “Porous SiOC bulk ceramic based on perhydropolysilazane (PHPS) and polysiloxane (PSO) pyrolysis,” 44th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2020), Daytona Beach, FL, January 26-31, 2020.
- K. Lu, K. Bawane, N. Yang, “Polymer Derived Silicon Oxynitride (SiON) Coatings for Corrosion Protection of Steels,” 44th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2020), Daytona Beach, FL, January 26-31, 2020.
- K. Lu, N. Yang, D. Erb, “Polymer Derived Functional High Temperature Materials,” 44th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2020), Daytona Beach, FL, January 26-31, 2020.
- K. Lu, N. Yang, “Polymer Derived High Temperature Ti-SiOC,” Materials Science & Technology 2019, Portland, Oregon, September 29-October 3, 2019.
- K. Lu, “Porous Silicon Oxycarbide Without Foreign Additives,” Eleventh International Conference on High-Performance Ceramics (CICC-11), Kunming, China, May 25-29, 2019.
- K. Lu, “Phase Development of Silicon Oxycarbide Nanocomposites Under Different Conditions,” Eleventh International Conference on High-Performance Ceramics (CICC- 11), Kunming, China, May 25-29, 2019.
- K. Lu, K. Bawane, K. Ning, “Nanostructured Ferritic Alloy-Silicon Carbide Composites for Nuclear Applications,” 2019 TMS Annual Meeting & Exhibition, San Antonio, Texas, March 10-14, 2019.
- K. Lu, D. Erb, L. Wang, and R. Ma, “Silicon Oxycarbide Through Flash Pyrolysis,” 43rd International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, FL, January 27-February 1, 2019.
- K. Lu, “Sintering Behaviors of Micron- and Submicron-sized Features,” Lehigh University MSE Departmental Seminar speaker, March 27, 2018.
- K. Lu, Donald Erb, “Effect of Reactive Additives on Polysiloxane Derived SiOC Porous Ceramics,” 42nd International Conference and Exposition on Advanced Ceramics and Composites, January 21-26, Daytona Beach, FL, 2018.
- K. Lu, H. Ju, “Sintering Behaviors of Micron- and Submicron-Sized ZnO Features,” International Conference on Sintering 2017, San Diego, CA, November 12-16, 2017
- K. Lu, K. Ning, “SiC-NFA Composites for Nuclear Cladding Applications,” Frontiers in Materials Processing Applications, Research and Technology, Bordeaux, France, July 9- 12, 2017.
- K. Lu, D. Erb, “Additive and Pyrolysis Atmosphere Effects on High Surface Area Silicon Oxycarbides,” Frontiers in Materials Processing Applications, Research and Technology, Bordeaux, France, July 9-12, 2017.
- K. Lu, “Solid Oxide Fuel Cell Interconnect Coatings,” 12th Pacific Rim Conference on Ceramic and Glass Technology, Waikaloa, HI, May 21-26, 2017.
- K. Lu, “Polysiloxane-Derived Porous SiOC Ceramics,” 12th Pacific Rim Conference on Ceramic and Glass Technology, Waikaloa, HI, May 21-26, 2017.
- K. Lu, K. Ning, K. Bawane, “Fabrication of Novel NFA-SiC Composites for Nuclear Applications,” AFC Integration Meeting, Oak Ridge, TN, March 28-30, 2017.
- K. Lu, “Polymer Derived Ceramics and a World of Possibilities on Research, Education, and Friendship,” Humboldt Colloquium: Global Research in the 21st Century: Perspectives of the U.S. Humboldt Network, Washington D.C., March 2-4, 2017.
- K. Lu, “Material Needs and Developments in Energy Conversion, Harvesting, and Storage,” Fifth Biennial Conference of the Combined Australian Materials Societies 2016, Melbourne, Australia, December 6-8, 2016 (Keynote).
- K. Lu, “Understanding Current State of Materials Education for a Successful Career Tomorrow,” Materials Science & Technology 2016, Salt Lake City, UT, October 23-27, 2016.
- K. Lu, K. Shen, “Study of Cathodes and Interconnect Coatings for Solid Oxide Fuel Cells,” Materials Day Symposium-Ceramics for Energy, Darmstadt, Germany, April 29, 2016.
- K. Lu, K. Shen, “Perovskite-type Cathode Materials and Coatings for Solid Oxide Fuel Cells,” 2016 145th TMS Annual Meeting & Exhibition, Nashville, TN, February 14-18, 2016.
- K. Lu, “FIB Guided Anodization Patterning, Morphology Control, and Feature Array Transfer,” University of North Carolina, Charlotte, 2/17/2016-2/18/2016.
- K. Lu, “Growing Materials Education Diversity for a Successful Career Tomorrow,” Materials Science and Engineering 2015 Conference, Columbus, OH, October 4-8, 2015.
- K. Lu, Z. Tang, Z. Hu, “Silicon Carbide and Oxide Dispersion Strengthened Steel Cladding Materials for Nuclear Applications,” Materials Science and Engineering 2015 Conference, Columbus, OH, October 4-8, 2015.
- F. Shen, K. Lu, “Properties of Electrodeposition Co and Electrophoresis Sm0.2Ce0.8O1.9 Protective Layer on AISI 441 for Solid Oxide Fuel Cells,” Materials Science and Engineering 2015 Conference, Columbus, OH, October 4-8, 2015.
- K. Lu, K. Shen, “Study of Different New Cathode Materials and Electrocatalyst Incorporation in Solid Oxide Fuel Cells,” The 11th International Conference of Pacific Rim Ceramic Societies (PacRim-11), Jeju Island, South Korea, August 30-September 4, 2015.
- K. Lu, F. Shen, “(La0.6Sr0.4)xCo0.2Fe0.8O3 and Related Cathode Materials in Solid Oxide Fuel Cells,” 2015 TMS 144th Annual Meeting & Exhibition, Walt Disney World, Orlando, FL, March 15-19, 2015.
- K. Lu, “3D Microstructure Characterization of Nanoparticle-based Material Sintering,” the International Conference on Sintering 2014, Dresden, Germany, August 24-28, 2014 (Keynote).
- K. Lu, “Patterning, Morphology Control, and Feature Array Transfer through Focused Ion Beam Guided Anodization,” University of Virginia, Charlottesville, VA, April 14, 2014.
- K. Lu, M. Gervasio, “Formation and Characterization of Nanoparticle based Sub-micron Structures,” 38th International Conference and Expo on Advanced Ceramics and Composites, Daytona Beach, FL, January 26-31, 2014.
- K. Lu, “Development of a Nanoparticle-based Surface Templating Approach,” 12th International Conference on Ceramic Processing Science, Portland, Oregon, August 4-7, 2013.
- K. Lu, W. Li, “Different Cathode Interactions and Performance Behaviors in Solid Oxide Fuel Cells,” 10th Pacific Rim Conference on Ceramic and Glass Technology, San Diego, California, June 2-7, 2013.
- K. Lu, “Material Uses and Challenges in Solid Oxide Fuel Cells,” Departmental seminar at Technische Universität Darmstadt, Darmstadt, Germany, November 2012.
- K. Lu, B. Chen, K. Ramsburg, “ZnO Nanoparticle-based Surface Templating,” 36th International Conference and Expo on Advanced Ceramics and Composites, Daytona Beach, Florida, January 22-27, 2012.
- K. Lu, T. Jin, “Interactions of Electrolyte-(La0.8Sr0.2)xMnO3 Air Electrode Interconnect Tri-layers for Solid Oxide Fuel Cells,” 36th International Conference and Expo on Advanced Ceramics and Composites, Daytona Beach, Florida, January 22-27, 2012.
- K. Lu, W. Li, J. Walz, “Understanding of Silica-Kaolinite Composite Sintering,” Materials Science & Technology 2011 Conference and Exhibit (MS&T '11), Columbus, OH, October 16-20, 2011.
- K. Lu, “Search and Study of a Solid Oxide Fuel Cell Seal Material,” 2011 TMS Annual Meeting & Exhibition, San Diego, CA, February 27-March 3, 2011.
- K. Lu, B. Chen, Z. Tian, “Understanding Effect of Surface Morphology during Focused Ion Beam Guided Anodization,” 35th International Conference & Exposition on Advanced Ceramics & Composites, Daytona Beach, FL, January 23-28, 2011.
- K. Lu, “Nanoparticle-Based Material Processing and Templating,” Ohio State University, Columbus, OH, May 22, 2009.
- K. Lu, “Energy and Nanoscale Materials,” University of Maryland at Baltimore County, Baltimore, MD, May 9, 2008.
- K. Lu, “Correlating Microscopic and Macroscopic Aspects in Solid-State Sintering,” Extrude Hone Corporation, Irwin, PA, November 30, 2004.
- K. Lu, “Particle Packing, Strength Evolution, and Densification in Solid-State Sintering,” Naval Research Laboratory, Arlington, VA, October 22, 2004.
- K. Lu, “Battery Research and Technology,” Advanced Materials Laboratory at Sandia National Lab, March 15, 2004.